Dc-In Port; Removing The Dc-In - Dell Latitude 5401 Service Manual

DC-in port

Removing the DC-in

Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
3. Remove the battery.
4. Remove the heatsink-discrete.
About this task
The figure indicates the location of the DC-in and provides a visual representation of the removal procedure.
Steps
1. Locate the DC-in port on your computer.
2. Remove the two (M2x5) that secure the DC-in metal bracket.
3. Lift the DC-in metal bracket from the computer.
4. Disconnect the DC-in cable from the connector on the system board.
5. Remove the DC-in port from the computer.
Disassembly and reassembly 45