Led Board; Removing The Led Board - Dell Latitude 5401 Service Manual

Steps
1. Locate the touchpad button board slot on your computer.
2. Align and place the touchpad button board into the slot on your computer.
3. Replace the two (M2x3) screws to secure the touchpad button board to the plamrest.
4. Connect the touchpad button board cable to the connector on the system board and secure the latch.
Next steps
1. Install the inner frame.
2. Install the WLAN card.
3. Install the WWAN card.
4. Install the 2280 SATA SSD.
5. Install the battery.
6. Install the base cover.
7. Follow the procedure in

LED board

Removing the LED board

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the battery.
4. Remove the 2280 SATA
5. Remove the WLAN card.
6. Remove the WWAN card.
After working inside your computer.
Before working inside your
SSD.
computer.
Disassembly and reassembly 51