Installing The Coin-Cell Battery; Inner Frame; Removing The Inner Frame - Dell Latitude 5401 Service Manual

Installing the coin-cell battery

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the coin-cell and provides a visual representation of the installation procedure.
Steps
1. Locate the coin-cell battery slot on your computer.
2. Adhere the coin-cell battery on to the slot.
3. Connect the coin-cell cable to the connector on the system board.
Next steps
1. Install the battery.
2. Install the base cover.
3. Follow the procedure in

Inner frame

Removing the inner frame

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the battery.
4. Remove the 2280 SATA
5. Remove the WLAN card.
6. Remove the WWAN card.
After working inside your computer.
Before working inside your
SSD.
computer.
Disassembly and reassembly 33