Steps
1. Connect the display cable to the connector and close the latch.
2. Adhere the adhesive strip to secure the display cable connector.
3. Turn back and place the display panel over the display back cover.
4. Replace the two (M2.5x3) screws that secure the display panel to the display assembly.
Next steps
1. Install the
display hinge
2. Install the
display
bezel.
3. Install the
display
assembly.
4. Install the battery.
5. Install the
base
cover.
6. Follow the procedure in
82
Disassembly and reassembly
caps.
After working inside your
computer.