Steps
1. Locate the coin-cell slot on your computer.
2. Adhere the coin-cell on to the slot.
3. Reconnect the coin-cell cable to the system board.
Next steps
1. Install the battery.
2. Install the
base
cover.
3. Follow the procedure in
DC-in port
Removing the DC-in
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
heat sink (for discrete
About this task
The figure indicates the location of the DC-in and provides a visual representation of the removal procedure.
After working inside your
computer.
Before working inside your
only).
computer.
Disassembly and reassembly
37