Installing The Hard Drive Assembly; Dc-In Port; Removing The Dc-In Port - Dell J1FD8 Service Manual

Installing the hard drive assembly

Steps
1. Align the screw holes on the hard drive bracket with the screw holes on the hard drive.
2. Replace the four (M3x3) screws that secure the hard drive bracket to the hard drive.
3. Connect the hard drive cable to the hard drive assembly.
4. Replace the four (M2x2.7) screws that secure the hard drive assembly to the palmrest and keyboard assembly.
5. Connect the hard drive cable to the system board.
Next steps
1. Replace the battery.
2. Replace the base cover.
3. Replace the microSD
4. Follow the procedure in

DC-in port

Removing the DC-in port

Prerequisites
1. Follow the procedure in
2. Remove the microSD
3. Remove the base cover.
4. Remove the battery.
Steps
1. Remove the two (M2x5) screws that secure the Type-C bracket to the system board [1].
2. Lift the Type-C bracket away from the computer [2].
40 Disassembly and reassembly
card.
after working inside your
before working inside your
card.
computer.
computer.