Steps
1. Re-adhere the coin-cell battery to the slot on the palmrest assembly.
2. Connect the coin-cell battery cable to the system board.
Next steps
1. Reconnect the
battery
2. Install the
base
cover.
3. Install the
SD card
4. Follow the procedure in
DC-in port
Removing the DC-in
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Disconnect the
battery
About this task
The figure indicates the location of the DC-in and provides a visual representation of the removal procedure.
cable.
After working inside your
Before working inside your
cable.
computer.
computer.
Disassembly and reassembly
31