Henny Penny Evolution Elite EEE-141 Operator's Manual page 79

Press the program button once more and "DO NOT DISTURB" "ENTER CODE"
2 2 ) )
flash in the left display.
Enter code 1, 2, 3.
3 3 ) )
"DO NOT DISTURB ENABLED?" flashes in the left display and "YES" or "NO"
4 4 ) )
appears in the right display. Press the up and down buttons to choose "YES" or
"NO".
Press the program button and "M-F 1" shows in the left display and the time
5 5 ) )
flashes in the right display. Press the up and down arrow buttons, or product
buttons, to change the time.
Press the program button and "M-F 1" shows in the left display and "A" or "P"
6 6 ) )
flashes in the right display. Use the up and down arrow buttons to choose AM or
PM.
Press the program button and "M-F 1" shows in the left display and far right
7 7 ) )
character display flashes. Press the product buttons to enter amount of time (up
to 180 minutes) during which filtering will be inhibited, after time entered in step
5.
Press the program button to move to the next timer period, M-F 2.
8 8 ) )
Repeat steps 5, 6, 7, and 8 for other desired time periods.
9 9 ) )
6 6 . . 3 3 C C l l o o c c k k S S e e t t
Press and hold the Program button for 5 seconds until "LEVEL 2" "SP PROG"
1 1 ) )
"ENTER CODE" shows in the display.
Press the program button again and "CLK SET" "ENTER CODE" flashes in the
2 2 ) )
left display.
Enter code 1, 2, 3.
3 3 ) )
"CS-1 ENTER DATE MM-DD-YY" flashes in the left display. Use the product
4 4 ) )
button to set the date in the right display.
Press the right arrow button and "CS-2 ENTER TIME" flashes in the left display
5 5 ) )
and the time flashes in the right display. press the up and down arrow buttons,
or product buttons, to change the time.
Press the right arrow button and "CS-2 ENTER TIME" flashes in the left display
6 6 ) )
and "AM" or "PM" flashes in the right display. Use the up and down arrow
buttons to choose "AM" or "PM".
Press the right arrow button and "CS-3 TIME FORMAT" flashes in the left
7 7 ) )
display and "12-HR" or 24-HR" shows in the right display. Use the up and down
arrow buttons to choose a 12-hour time format or a 24-hour time format.
Press the right arrow button and "CS-4 DAYLIGHT SAVING TIME" flashes in
8 8 ) )
the left display. Use the up and down arrow buttons to choose daylight saving
time for your area: 1.OFF; 2.US (2007 & after); 3.EURO; or 4.FSA (US before
2007).
Press and hold the program button to exit.
9 9 ) )
67