Henny Penny Evolution Elite EEE-141 Operator's Manual page 74

Menu Step
SP-7 Idle Mode
Enabled
SP-8 Filter Tracking
Mode
62
An Idle Mode allows the oil temperature to drop to a lower tempera-
ture when not in use. This saves on oil and utilities. Press and release
the right arrow button until "SP-7" "IDLE MODE ENABLED?" flashes
in the left display. Press the up or down arrow buttons to choose
"YES" or "NO". With "YES" in the display, press the right arrow button
and "SP-7A" "USE '0' FOR IDLE" flashes on the left display. Press
the up or down arrow buttons to select "YES" or "NO". If "YES" is se-
lected, an Idle Mode can be programmed in product button 0. Press
the down arrow button and "SP-7B" "AUTOIDLE MINUTES" flashes
in the left display. Press the up or down arrow buttons, or use the
product buttons, to set the time (0 to 60 minutes) fryer stays idle be-
fore auto-idle is enabled. Ex., "30" means, if product is not cooked in
that vat for 30 minutes, the control automatically cools the oil down to
the idle set-point temperature. Press the right arrow button and "SP-
7C" "IDLE SETPT" flashes in the left display. Press the up or down ar-
row buttons, or use the product buttons, to set idle temperature 200°F
to 375°F (93°C to 191°C).
Filter Tracking signals the operator when the oil needs filtering by
counting the number of Cook Cycles between filters. Press and re-
lease the right arrow button until "SP-8" "FILTER TRACKING MODE"
shows in the display. Use the up and down arrow buttons to choose
either "1.MIXED" filter tracking or "2.GLOBAL"
I I N N F F O O :
• GLOBAL means all the products have the same number of cook
cycles between filters
• MIXED means each product may be set with different number of
cook cycles between filters. The controls add the cycle count (see
example below) and when the counts equal 1 or greater, filtering
is suggested. Ex., 1 load of fish. 2 loads of french fries, a load of
chicken equals 1. 1/2 + 1/8 + 1/8 + 1/4 = 1
Product
Fish
French Fries
Chicken
M M I I X X E E D D
If MIXED is selected, press the right arrow button and SP-8A" "SUG-
GEST FILTER AT..." shows in the left display, and a value between
75% and 100 % shows on the right display. Press the up and down
arrow buttons to change this value. The lower the value, the sooner
the control recommends to filter. Ex: If set to 75%, the control suggest
filtering after 3/4 of the programmed cook cycles must be completed
before the control suggest filtering. Press the right arrow button and
"SP-8B" "LOCKOUT ENABLED?" shows in the left display. Press the
up and down arrow buttons to choose "YES or "NO". If set to "YES",
Description
No. Cook Cycles Cycle Count
2
8
4
1/2
1/8
1/4