Gearbox - Husqvarna LB248S Workshop Manual

5. Remove the 4 screws. Remove the front axle.
6. Disassemble the parts in the left front wheel
suspension.
7. Disassemble the parts in the right front wheel
suspension.
510 - 001 -
7.5.2 To clean and examine the front axle
1. Examine the front axle for damages. Replace the
front axle if necessary.
7.5.3 To assemble the front axle
1. Assemble in the opposite sequence. Make sure to
use the correct torque. Refer to
LB348SI on page 11 .

7.6 Gearbox

7.6.1 To disassemble the gearbox
1. Disassemble the belt. Refer to
drive belt on page 20 .
2. Remove the rear wheels. Refer to
the wheels on page 15 .
3. Remove the circlip. Remove the pinion. Remove the
dust cover.
4. Remove the left front wheel.
LB248S , LB253S,
To disassemble the
To disassemble
Repair instructions - 17