Gearbox - Husqvarna LC 247Li Workshop Manual

7.6 Gearbox

7.6.1 To remove and install the gearbox (LC
347VLi, LC 347iVX and LC 353iVX)
1. Remove the hubcap.
2. Remove the wheel. Refer to
the wheels on page 22 .
3. Remove the snap ring with a snap ring pliers.
Remove the pinion and the inner snap ring.
24 - Repair instructions
To remove and attach
4. Remove the dust cover.
5. Adjust the cutting deck to its highest position.
6. Turn the product to the left or right side. Use a piece
of wood to make the product stable.
361 - 001 -