Equipment Installation; Connections To Be Made - Televes RSD - 711801 User Manual

User Manual

4.- Equipment Installation

4.1.- Connections to be made

This section explains how the satellite
receiver is installed. For the installation
of the external equipment such as the
aerial, consult the manual supplied with
the product. If you wish to add any new
pieces of equipment, make sure you
consult the pertinent part of the
manual.
DO NOT PLUG IN the
Receiver to the power
grid before making all the
connections for the unit.
Note:
- All the cables used for connecting the Receivers must be of the screened type (shielded from interference).
1- Install the aerial so that it faces the
satellite directly. After doing so,
connect the aerial cable to the sate-
llite receiver.
2- Connect the satellite receiver to the
TV set and
equipment.
Satellite Reception
7268
TV
VCR
(Recommended)
3- Establish the items on the receiver
The receiver is now ready for use.
other peripheral
RSD-711801
LNB IN
VIDEO
OUT
TV OUT
ANT IN
AUDIO
L R VCR TV
IF OUT RS232
OUT Made in China
8
"RSD - 711801"
menu according to the TV set and
the peripheral equipment.
Terrestrial Reception
Internal F1:
T2AL 250V
MODEL NO: RSD 7118
220 - 240 V~
50/60 Hz, 25W