Table of Contents
Advertisement
2
Install Cylinder
Test Cylinder
?
X
!
Use key to thread
cylinder. Pull key
out of cylinder to
first blade cut for
best operation.
If using cylinder other than 1-1/8", a new collar must
i
be used that is sized appropriately for cylinder length.
Test cylinder by turning key counter-clockwise to unlock trim. If
there is any binding then cylinder is not at correct depth and needs
to be threaded further into escutcheon.
P/N 80-8470-0900-000 (09-19)
4
!
Tighten
counter-clockwise
to secure lock.
Advertisement
Table of Contents
