Table of Contents
Advertisement
Quick Links
WARNING
This product can expose
you to lead which is
known to the state of
California to cause cancer
and birth defects or other
reproductiveharm.For
more information go to
www.P65warnings.ca.gov.
08/2018
Retrofitting or modifying this
product may impact fire rating,
safety features and warranty.
Consult with code specifications to
ensure compliance with all codes
and ratings.
Part of ASSA ABLOY
nexTouch
™
Keypad Access Sectional Mortise Lock
Touchscreen and Push Button
Installation and Programming Instructions
Tools Needed
Optional
1/8"
3/32"
#3 & #2
3/4"
1/2"
80-9086-0030-010 04-21
Advertisement
Table of Contents
Related Manuals for Assa Abloy Yale nexTouch
Summary of Contents for Assa Abloy Yale nexTouch
- Page 1 #3 & #2 08/2018 Retrofitting or modifying this product may impact fire rating, safety features and warranty. Consult with code specifications to ensure compliance with all codes 3/4" 1/2" and ratings. 80-9086-0030-010 04-21 Part of ASSA ABLOY...
- Page 2 (See step 1 to reverse latchbolt.) RED Locking Slide should face the secure side of door. Key cylinder used for cylinder option installation. T humbturn used when mortise lock is equipped with deadbolt. 80-9086-0030-010 04-21 Part of ASSA ABLOY...
- Page 3 Continue to rotate locking slide from other side PUSH IN until "set" in position. causing locking slide to rotate. RED MARK on locking slide must be on secure side of door! 80-9086-0030-010 04-21 Part of ASSA ABLOY...
-
Page 4: Prepare Door
Inside of Door Mortise Lock Cable Hole: Drill only 1/2 way into door (7/8" depth) then STOP! Mortise Deadbolt Thumbturn Hole: Drill only 1/2 way into door ONLY if lock is equipped with deadbolt. 80-9086-0030-010 04-21 Part of ASSA ABLOY... - Page 5 Prepare Frame & Install Strike #12-24x1" Flat Head Combo Screw Frame This prep is standard with or without deadbolt. Optional Strike Box Use #3 Philips head screwdriver 80-9086-0030-010 04-21 Part of ASSA ABLOY...
- Page 6 Install Mortise Lock #12-24x1" Flat Head Combo Screw Inside of Door Mortise Lock Cable Hole Do not tighten screws until Step 10. Use #3 Philips head screwdriver Make sure mortise pocket is free from debris. 80-9086-0030-010 04-21 Part of ASSA ABLOY...
- Page 7 Outside of Door HAND TIGHTEN. First, tighten cylinder Do not use powered until snug against screw driver. door with the Yale logo horizontal. Then, use #2 Philips head screwdriver to tighten cylinder set screw. Test Operation 80-9086-0030-010 04-21 Part of ASSA ABLOY...
- Page 8 Outside of Door #8-32x1" Pan Head Screw with Thread Locker (For 1-3/4" Door) If provided Inside of Door Tighten screws securely but avoid overtightening and warping door. If provided Use #2 Philips head screwdriver 80-9086-0030-010 04-21 Part of ASSA ABLOY...
- Page 9 Loosen Inside Spindle 1/2 to 1 turn until Correct Orientation. Correct Inside Lever Orientation Inside Spindle Outside Lever Install Levers Pushing levers together, use hex wrench Outside to tighten set screw securely of Door against spindle. 80-9086-0030-010 04-21 Part of ASSA ABLOY...
- Page 10 Inside of Door Use #2 Philips head screwdriver Test Operation Deadbolt retracts and extends by thumbturn and key. Once extended, it will also retract by lever. Latchbolt retracts and extends by levers and key. 80-9086-0030-010 04-21 Part of ASSA ABLOY...
- Page 11 Yale logo will be Outside at top and visible of Door when installed. Use #2 Philips head screwdriver Tighten lockbody screws before installation of front. Do not bow front of lock case by overtightening. Test Operation Again 80-9086-0030-010 04-21 Part of ASSA ABLOY...
- Page 12 Install Keypad Inside of Door 80-9086-0030-010 04-21 Part of ASSA ABLOY...
- Page 13 Install Inside Mounting Plate #10-32x3/4" Pan Head Screw with Washer (For 1-3/4" Door) 3/32" Hex Wrench Choose fasteners appropriate for your door thickness. Inside of Door Use #2 Philips head screwdriver 80-9086-0030-010 04-21 Part of ASSA ABLOY...
- Page 14 Attach Cables to Inside Lock Inside of Door Cables must be clear of all fastener holes. 80-9086-0030-010 04-21 Part of ASSA ABLOY...
- Page 15 Install Inside Lock #8-32x3/8" Pan Head Screw (Black) Inside of Door Use #2 Philips head screwdriver 80-9086-0030-010 04-21 Part of ASSA ABLOY...
- Page 16 “Welcome to Yale.” Optional Network or Yale Accentra Key module must be installed BEFORE batteries. See Installation Options. Congratulations, you’ve installed the Yale nexTouch™ Keypad Access Sectional Mortise Lock! Continue to customize your product. 80-9086-0030-010 04-21 Part of ASSA ABLOY...
-
Page 17: Installation Options
Remove batteries if adding module to existing unit. The Yale Accentra Key module enables access with physical (cards and fobs) and mobile credentials ONLY. Creation and use of User PIN codes are disabled. 80-9086-0030-010 04-21 Part of ASSA ABLOY... -
Page 18: Programming Instructions
Low Battery Indicator (Touchscreen) Unlock Indicator (Touchscreen) 9Volt Battery Lockout Mode Indicator Override Terminal (Touchscreen) Keypad Indicator Light Speaker Privacy Button Inside Lock 80-9086-0030-010 04-21 Part of ASSA ABLOY... - Page 19 Press (Push Button) "Enter a 4-8 digit Enter 4-8 digit PIN code. Press the Master PIN Code. gear key to continue." Press Deadbolt Press Installed: Press 1 No Deadbolt: Press 3 Press "Registered." "Completed." 80-9086-0030-010 04-21 Part of ASSA ABLOY...
- Page 20 Press the gear key to continue." to continue." Press 2 Press 1 Press Press "Press 1 to "PIN code registration. register a code." Enter a 4-8 digit PIN code. Press the gear key to continue." 80-9086-0030-010 04-21 Part of ASSA ABLOY...
- Page 21 Press the gear key to continue." Adding more User Codes: To end programming: Press Press Enter 4-8 digit PIN code "Completed." Press "Registered. Press the check key to complete. Press the gear key to continue." 80-9086-0030-010 04-21 Part of ASSA ABLOY...
- Page 22 With One Touch Locking Enter PIN Code Enabled: Press Press (Touchscreen) Press (Push Button) Locking Door with Privacy Button Privacy Button pressed once will lock door. To activate Privacy Mode, press and hold Privacy Button. 80-9086-0030-010 04-21 Part of ASSA ABLOY...
-
Page 23: Resetting Lock To Factory Default
Insert Module. Reinstall batteries. 5. Press and hold the reset button for 3 seconds. Upon reset, Master PIN Code creation is the only option available and must be performed prior to any other programming of the lock. 80-9086-0030-010 04-21 Part of ASSA ABLOY... - Page 24 The push button keypad will flash and the Yale icon will flash blue for the shut down period. The keypad will be available after the shut down time is complete. 80-9086-0030-010 04-21 Part of ASSA ABLOY...
-
Page 25: Feature Programming Through Menu Mode Using Master Pin Code
Language Setting English in bold. Spanish **This function appears only French with Yale Z-Wave network module installed. Enable All Code Lockout Disable **Network Module Setting Join the network Exit the network **Set-up Digital Keys 80-9086-0030-010 04-21 Part of ASSA ABLOY... -
Page 26: Programming Troubleshooting
NOTE: When batteries are replaced, Network Module locks have a real time clock that will be set through the User Interface (UI); it is recommended to verify correct date and time particularly those locks operating under Daylight Saving Time (DST). 80-9086-0030-010 04-21 Part of ASSA ABLOY... -
Page 27: Factory Settings
*The Master PIN code must be registered prior to any other programming of the lock. One Touch Locking Enabled Privacy Mode Disabled Shutdown Time 60 Seconds Volume Setting High Wrong Code Entry Limit 5 Times 80-9086-0030-010 04-21 Part of ASSA ABLOY... - Page 28 Yale Commercial is a business associated with ASSA ABLOY Access and Egress US.YaleHome.com Hardware Group, Inc., an ASSA ABLOY Group company. Copyright © 2018 - 2021, Email for orders: ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved.