Connections And Mechanical Components Of The Base Unit - Fronius Robacta TC 2000 ext. Operating Instructions Manual

(5)
Connections and
Mechanical Com-
ponents of the
Base Unit
Device front
If the button is pressed and held down, the cleaning device will carry out the following
functions in sequence:
1. Cleaning process is triggered
2. Wire cutter is activated (if present)
3. Compressed air/parting agent mixture is sprayed out of the cleaning aperture
NOTE! Prerequisite for the cleaning device carrying out the above function:
The "Quick Stop" signal is set, so that the capacitors are charged.
Ready to clean indication
Lights up when the device is ready to clean
WARNING! Danger of serious injury and damage from electric shock. Once the
ready to clean indication (5) lights up, do not disconnect the interconnecting hose-
pack from the base unit.
Before disconnecting the interconnecting hosepack:
- Disconnect the base unit power supply
- Disconnect the base unit compressed air supply
No. Function
(1) Standard I/O (X1) connection so-
cket
(2) Mains cable with strain relief de-
vice (mains cable not present on
Robacta TC 2000 ext. US)
(1)
(3) Collecting container for welding
residue (in optional work stand)
(2)
(3)
31