Safety Symbols; Backup; Copyright - Fronius Robacta TC 2000 ext. Operating Instructions Manual

Welding torch cleaning
Hide thumbs Also See for Robacta TC 2000 ext.:
Table of Contents

Advertisement

Safety Symbols

Backup

The user is responsible for backing up any changes made to the factory settings. The man-
ufacturer accepts no liability for any deleted personal settings.

Copyright

14
Devices with the CE label satisfy the essential requirements of the low-voltage
and electromagnetic compatibility directives (e.g. relevant product standards
of the EN 60974 series).
Fronius International GmbH declares that the device complies with Directive
2014/53/EU. The full text of the EU Declaration of Conformity is available on
the following website: http://www.fronius.com
Devices marked with the CSA test mark satisfy the requirements of the rele-
vant standards for Canada and the USA.
Copyright of these operating instructions remains with the manufacturer.
Text and illustrations are technically correct at the time of going to print. The
right to make modifications is reserved. The contents of the operating instruc-
tions shall not provide the basis for any claims whatsoever on the part of the
purchaser. If you have any suggestions for improvement, or can point out any
mistakes that you have found in the operating instructions, we will be most
grateful for your comments.

Advertisement

Table of Contents
loading

Table of Contents