Pip/Pbp Menu - Eiki EK-610UA Owner's Manual

DLP Projector — Owner's Manual

PIP/PBP Menu

Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OUTPUT and press
the Enter button to enter the OUTPUT menu. Press the arrow keys (pq) to select PIP/PBP and press
the Enter button to enter the PIP/PBP menu. Press the arrow keys (pq) to select the menu option
and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the
desired settings and press the Enter button to confirm.
I
tem
PIP/PBP Enable
Main Source
Sub Source
Swap
Size
Layout
PIP/PBP layout and size table as described below.
¾ P : indicates primary source region (lighter color).
¾ * : Both source regions are the same size.
pIp/pbp L
PBP, Main Left
PBP, Main Top
PBP, Main Right
PICTURE
PIP/PBP Enable
Main Source
Sub Source
OUTPUT
Swap
Size
Layout
SETUP
OPTION
Toggle between displaying two sources at once (Main and PIP/PBP
images) or one source only.
From the list of active inputs, select one to be used as the main image.
From the list of active inputs, select one to be used as the PIP/PBP.
Change the main image to PIP/PBP, and the PIP/PBP to main image.
Swapping is available only when PIP/PBP is enabled.
Select the PIP/PBP size. Available options: Small, Medium, or Large.
Set the location of the PIP/PBP image on the screen.
ayoUt
s
PIP/PBP
pIp/pbp s
maLL
P
P
P
36
— —
On
VGA
DVI-D
Large
PBP, Main Left
D
escrIptIon
IZe
m
eDIUm
P
P
P
L
arge
P
P
P