Keysight PXA N9030A Installation Note page 26

Frequency Range Upgrade from RF or Microwave to Millimeter Wave Frequency
Re-label Instrument with New Frequency Range
1. Locate the correct rear panel label that indicates the new frequency range of the analyzer. The
rear panel labels are printed with the option number and frequency range. Example:
"544 44 GHz".
2. Remove the bar code portion of the label and discard this bar code portion. Apply this label to
the rear panel as shown in
Figure 14 Rear Panel Label
3. Locate the correct front panel label that indicates the new frequency range of the analyzer.
The front panel labels show only the new frequency range. Example: 44 GHz Apply the label to
the front panel as shown in
26
Figure 14.
Figure 15.
Installation Note N9030-90066