Keysight PXA N9030A Installation Note page 18

Signal analyzer frequency range upgrade from rf or microwave to millimeter wave frequency

Hide thumbs Also See for PXA N9030A:

Frequency Range Upgrade from RF or Microwave to Millimeter Wave Frequency

54.Refer to

Figure

7. Position the switch/bracket assembly into the frame. Route W7 ribbon cable

between the switches. Notice the position of the other ribbon cable W55 and wire harness

W12. Secure the switch assembly with two 0515-1035 screws (1). Torque to 9 inch-lbs. Insert

W7 ribbon cable into Low Band Switch header. Ensure the locking tabs are engaged.

Figure 7

Cable Routing

Installation Note N9030-90066

Table of Contents