Table of Contents
Advertisement
User Manual
SB-DN-MAC01.331
6.2.2.1 Test the wiring
The wiring test ensures that every relay has been wired correctly and that the system can
operate safely, so before programming an end-user panel, the relay wiring can be tested
here.
Steps:
To test the wiring of this module:
a) On the "setting" tab tick the option "model of test relay enable "to enter the test mode.
b) You can read each relays status by clicking on "read" button
c) Then click on "set "to check and test each relay.
6.2.2.2 Air-condition delay settings
The compressor delay helps to protect the HVAC module from several problems, so it's
better to set some delay for each compressor.
6.2.2.3 AC model configuration
AC controller – User Manual
6
Advertisement
Table of Contents
