User Manual
SB-DN-MAC01.331
7.4 MAC01.331FAQ004_HDL-BUS
Q:
I find that when a desired temperature is reached, the fan is still running.
A:
If the fan speed had been set as "Low", "Medium" or "High" but not "Auto", the fan
would run all the time even the desired temperature is reached, but no problem it is pure
wind, not cold wind or hot wind. If the fan speed had been set as "Auto", you probably
forgot to enable the option "Power-saving" in HDL-BUS Pro Setup Tool.
AC controller – User Manual
17