User Manual
SB-DN-MAC01.331
that the temperature will be broadcasted from.
6.2.3.3: Host settings
As we mentioned above one master HVAC module can host and control about 8 slave
modules, so all of those slave modules will get the modes and fan speed settings through
the master module.
Steps:-
a) Tick the option "Host Enable"to enable the function
b) Select the "Slave No"
C) Tick on Enable to enable the hosting function for the specified module.
6.2.3.4: model and statue
This section focuses on the AC information and its modifications
6.2.3.4.1: temperature type
Select one of the temperature measurements
a) Celsius ( C ) b) Fahrenheit(F)
AC controller – User Manual
10