Table of Contents
Advertisement
d) Time type:
select the time format (24hours or 12hours format) and date format.
e) Temp range:
set a temperature for each mode
f) Sensor model settings:
are about three options:-
a) Refer to inside sensor:
the respective HVAC module.
b) Refer to outside sensor:
temperature sensors, there is an average temperature broadcasting feature for outside
temperature by selecting "receive broadcast "option
c) Refer to average value:
set of temperature sensors, instead of without showing each sensors temperature, the
panel will combine all the received temperature and display their average value including
the indoor temperature.
2) Control AC running
Checking this option can Set the mode and speed comparing to indoor temperature and
obtain the actual pattern and speed, this function should be selected as its very important
for both controlling from ilife and DLP .
3) AC graphics
Select the panel display photo for each mode and speed, there are some standard default
photos, you can select default to use the system photos.
AC controller – User Manual
this is the temperature sensing and broadcasting settings, there
with this option, the temperature will be broadcasted locally from
the temperature will be broadcasted from outside
this is to broadcast the typical average temperature value for
User Manual
SB-DN-MAC01.331
14
Advertisement
Table of Contents
