Table of Contents
Advertisement
Steps: to setup a display photo for each key
a) Select
AC graphics
and switch to content page
b) Choose
set up
option
c) Double click on the white blank area to open a picture
d)
Send photo
and
save
P.s:- the picture format must be in P.M.P
A display picture for slave DLPs can be setup here also,
a) Select
AC graphics
and switch to
slave picture
b) Choose set-up option
c) Double on each keys picture to open a photo
d) Send photo and Save state.
4) IR automatic control:
5) Send IR when power on:
AC controller – User Manual
on DLP air-conditioning function tab ,it will popup the above window
state.
on DLP air-conditioning function tab, it will popup the above window
page
it's used to control AC by sending IR code
The DLP will send an IR command when its power
User Manual
SB-DN-MAC01.331
.
on.
15
Advertisement
Table of Contents
