Table of Contents
Advertisement
User Manual
SB-DN-MAC01.331
a) First enable the air-condition function by ticking on "enable"
b) Fill in the subnet/device ID of the HVAC module
c) Choose the AC type, normally choose "NEW"
d) Fill in the AC
No.
6.2.4.2: Test and control section
this section allows us to test the wiring of each relay and whether it's working fine
a) Test:
or not. You can test each relay by selecting the corresponding air-condition mode.
b) Control:
also in this section, you can set a desired temperature level for each mode so
the HVAC will stop automatically when the desired temperature is reached.
c) Unlock:
you can unlock or lock the AC function, which means if this option is not
selected the AC function is locked and can't be
used.
6.2.4.3: Slave information
This is the host settings for DLP air-conditioning function, one master DLP panel can host
about 8 slave DLP panels and the master DLP can control and monitor the slave DLPs.
Application:
- suppose that the kids room is on the second floor and you are on the third
AC controller – User Manual
12
Advertisement
Table of Contents
