Table of Contents
Advertisement
User Manual
SB-DN-MAC01.331
a) Fully control:
when this mode is selected the ability and authority to control its self, so it
can be controlled directly life I-LIFE application for IPAD, IPHONE and android.
b) Slave control:
when this mode is selected, the DLP has the power of controlling this
module so the other devices can control the HVAC only through DLP
6.2.3.2: Temperature sensor settings
This module can support up to 4 pieces of digital temperature sensors which produced by
HDL and there are two ways to broadcast the temperature
a) Refer to Inside sensor:
this module will receive the temperature locally from
HDL-digital temperature sensors ( DS18B20) which are connected to this module, this the
indoor temperature
.
b) Refer to outside sensor:
the module will receive the temperature from another module
with temperature sensing function such: another HVAC module , FH module or any
other HDL device with this feature.
Steps:
a) Select refer to outside sensor on the Air-setup tab
b) Tick on any of the 4 temperature sensors and fill the subnet/device ID of the module
AC controller – User Manual
9
Advertisement
Table of Contents
