Software Settings For The Zt-20Xx-Iog Module - ICP DAS USA ZT-257 Series Quick Start Manual

3.1.4. Software Settings for the ZT-20xx-IOG Module

The ZT-20xx-IOG Configuration Utility is a Windows-based tool that can be used to
remotely configure a ZT-20xx-IOG module via software. The utility can be downloaded from:
http://ftp.icpdas.com.tw/pub/cd/usbcd/napdos/zigbee/zt_series/utility/
Execute the ZT-20xx-IOG Configuration Utility.
①
Use the ZT-IOG Configuration Utility to
②
connect to the ZT-20xx-IOG module.
- Click the COM Port Settings button
and then select the COM port that is
being used by the ZT-2570 module.
ICP DAS, ZT-257x DIO Data Concentrator Quick Start Guide, v1.0
Copyright © 2016, by ICP DAS Co., LTD. All Rights Reserved
- Click the Read Settings button to
read the current settings that are
configured for the ZT-20xx-IOG
module, and then choose RUN or INIT
mode depending on the
configuration of the DIP switches.
(See Section 3.1.3 Hardware Settings
for more details)
Page 23