Before You Begin
1.5
Installation procedures
To install the LF-Series flowmeter, the following procedures are required:
•
Install the sensor (all models) – see Chapter 2
•
Install the transmitter
-
LF-Series field-mount transmitters – see Chapter 3
-
LF-Series DIN rail mount transmitters – see Chapter 4
•
Wire the transmitter to the sensor – see Chapter 5
•
Wire the transmitter outputs or connect the communication wires:
-
LF Series FM AN transmitters – see Chapter 6
-
LF-Series FM CIO transmitters – see Chapter 7
-
LF-Series FM FB or PA transmitters – see Chapter 8
-
LF-Series DIN AN transmitters – see Chapter 9
-
LF-Series DIN CIO transmitters – see Chapter 10
1.6
LF-Series model numbers
The LF-Series sensor model number has the following form:
LFxMxxxxxxxxxxx
The first four characters identify the sensor model.
The LF-Series transmitter model number has the following form:
LFTxxxxxxxx
where the fourth character identifies the transmitter type:
•
and
= FM AN
1
3
•
= DIN AN
2
•
= FM CIO
4
•
5
= DIN CIO
•
= FM FB
6
•
= FM PA
7
1.7
Additional documentation
For information on transmitter configuration and use, and flowmeter troubleshooting, see LF-Series
Transmitters: Configuration and Use, LF-Series Transmitters with F
Configuration and Use, or LF-Series Transmitters with Profibus-PA: Configuration and Use.
LF-Series Flowmeters: Sensor/Transmitter Installation
Fieldbus:
OUNDATION
3