Table of Contents
Advertisement
I/O Wiring – DIN CIO Transmitters
Figure 10-9
Figure 10-10
3–30 VDC
Note: Refer to Figure 10-15 for recommended
resistor versus supply voltage.
Excessive current will damage the transmitter.
Do not exceed 30 VDC input. Terminal current must be less than 500 mA.
60
Discrete output 1 wiring – Terminals 23 & 24 (Channel B) – Internal power
Total load
Note: See Figure 10-13 for output
voltage versus load information.
Discrete output 1 wiring – Terminals 23 & 24 (Channel B) – External power
–
+
Maximum sink current: 500 mA
Pull-up resistor or
DC Relay
CAUTION
LF-Series Flowmeters: Sensor/Transmitter Installation
–
+
–
+
Advertisement
Table of Contents
