Table of Contents
Advertisement
5. Preparing procedures & basic operation
TG-10SRX
(1.) Power output connector
Plug in one end of AC/DC adaptor cable to DC input socket in the rear panel of
receiver, and plug another end into an AC outlet.(Step 1)
(2.) Audio output connector
Connect one end of the AF output cable to the AF output socket in the rear panel, then
plug another end to the "MIC IN" input socket of a mixer or amplifier.(Step 2)
TG-10SRX equipped with balanced XLR output and unbalanced Ø6.3mm output,
choose the proper way for use.
(3.)LED panel
AF signal
1
RF signal
2
Channel Display
3
Diversity Display
4
(A or B antenna)
(4.) Setting the rubber pad
Four self-adhesive rubber pads are provided to ensure the stability.
They are to be placed on the bottom of the receiver.
13
AF OUTPUT
DCV INPUT
UNBAL .
12-18V/500mA
2
1
4
3
TG-10SRX
AF OUTPUT
BALANCED
Freq. Range:
Serial No.:
ANT. 2
ANT. 1
Advertisement
Table of Contents
