Loop Out Application - JTS TG-10STX Manual

6. Loop Out Application

Multiple Systems
Make use of the loop out connectors to deliver one signal from the mixer to multiple
TG-10STX or other devices.
1. Connect the mixer outputs to inputs of the first transmitter.
2. Connect loop out connectors of the first transmitter to the second one.
3. Connect subsequent systems in the same way.
TG-10R
Wireless Tour Guide Receiver
RESET
POWER
TG-10R
Wireless Tour Guide Receiver
RESET
POWER
TG-10R
Wireless Tour Guide Receiver
RESET
POWER
8