Table of Contents
Advertisement
(5.) Connecting the antenna
The user-friendly TG-10SRX antenna
comes with easy mount on socket for effortless.
Connect two antennas on the back of the the receiver
and align them upward.
(6.)Turning the receiver on/off
Turn the receiver on by pressing the "POWER"
button.
(7.) Adjusting the AF output level
Use the AF output level control located on the
front side of the receiver to adjust the AF signel
level that appears at output.
(8.) DR-900 dual pack adaptor
The dual rack adaptor is available to unify the half
rack space into a standard EIA size with single or
dual units.
(9.) Basic operation
1. Turning the receiver on and off by pressing the POWER button.
2. Press the SET button for 3 seconds to select channel and group.
3. Press the SET button again to store once you make any changes.
4. Press the UP or DOWN button to adjust the setting of a menu.
ANT.1 / ANT.2
AF output level
POWER
14
Advertisement
Table of Contents
