Sd Vflash Media Card (Optional); Replacing An Sd Vflash Media Card - Dell Precision Rack 7910 Owner's Manual

5. If you are removing the card permanently, install a metal filler bracket over the empty slot opening and close the expansion-
card locking tabs.
NOTE: You must install a filler bracket over an empty expansion card slot to maintain Federal Communications
Commission (FCC) certification of the system. The brackets also keep dust and dirt out of the system and aid in
proper cooling and airflow inside the system.
Figure 28. Removing and installing the GPU card
1. expansion-card locking tab (3)
3. PCIe card holder latch
5. expansion-card riser 3
Next steps
Follow the procedure listed in

SD vFlash media card (optional)

An SD vFlash card is a Secure Digital (SD) card that plugs into the SD vFlash card slot in the iDRAC port card. It provides
persistent on-demand local storage and a custom deployment environment that enables automation of server configuration,
scripts, and imaging. It emulates USB device(s). For more information, see the Integrated Dell Remote Access Controller User's
Guide at Dell.com/idracmanuals.

Replacing an SD vFlash media card

Steps
1. Locate the SD vFlash media slot on the system.
2. To remove the SD vFlash media card, push the card inward to release it, and pull the card from the card slot.
After working inside your
2. GPU card
4. expansion-card latch
system.
Installing and removing system components 53