Wireless card
Removing the wireless card
Prerequisites
1. Follow the procedure in
2. Remove the stand.
3. Remove the
back
cover.
4. Remove the
I/O
cover.
5. Remove the
system-board
About this task
The following image indicates the location of the wireless card and provides a visual representation of the removal procedure.
Figure 35. Removing the wireless card
Steps
1. Remove the screw (M2x3.5) that secures the wireless-card bracket to the wireless card.
2. Slide and lift the wireless-card bracket off the wireless card.
3. Disconnect the antenna cables from the wireless card.
4. Slide and remove the wireless card from the wireless-card slot.
Before working inside your
shield.
computer.
Removing and installing Customer Replaceable Units (CRUs)
61