Removing The Pcie Expansion Card; Installing The Pcie Expansion Card; Removing The Optional Ethernet Port Card - Dell OptiPlex 3046 - Mini Tower Owner's Manual

4 Close the front bezel door.
5 Install the:
a cover
b bezel
6 Follow the procedure in

Removing the PCIe expansion card

1 Follow the procedure in
2 Remove the:
• cover
• bezel
3 Open the front bezel
4 To remove the PCIe expansion card:
a Pull the release latch to unlock the PCIe expansion card [1].
b Push the release tab [2] and lift the PCIe expansion card out of the computer [3].

Installing the PCIe expansion card

1 Pull the release latch to open it.
2 Insert the PCIe expansion card to the connector on the system board.
3 Secure the PCIe expansion card by pushing the card retention latch until it clicks into place.
4 Close the release latch.
5 Close the front bezel door.
6 Install the:
a bezel
b cover
7 Follow the procedure in

Removing the optional Ethernet port card

NOTE: The location of the Ethernet port card may vary from what is displayed in the illustration.
1 Follow the procedure in
2 Remove the:
• cover
After Working Inside Your
Before Working Inside Your
door.
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
Computer.
Computer.
Removing and installing components 13