Emerson Rosemount 1057 Quick Start Manual page 10

Single channel transmitter

Hide thumbs Also See for Rosemount 1057:

Quick Start Guide

3.2

Prepare conduit openings

There are six conduit openings in all configurations of the transmitter.

Note

Emerson fits four of openings with plugs upon shipment.

Figure 3-1: Conduit openings

A. Front panel/keypad

B. Power leads

C. Alarm relay leads

D. Sensor 1 cable

E. 4-20 mA/HART

F. Sensor 2 cable

G. Spare opening

Note

Always use proper cable gland fittings and plugs for wire and cable

installations.

Conduit openings accept ½-in. (12.7 mm) conduit fittings or PG13.5 cable

glands. To keep the case watertight, block unused openings with Type 4X or

IP66 conduit plugs.

/Profibus

leads

September 2018

Rosemount 1057

Table of Contents