Emerson Rosemount 1057 Quick Start Manual page 15

September 2018
4.2 Instrument keypad
There are four function keys and four selection keys on the instrument
keypad.
Function keys
Four top-level menu items appear when you press MENU.
• Calibrate: Calibrate the attached sensor(s) and analog output(s).
• Hold: Suspend analog output(s).
• Program: Program outputs, measurement, temperature, security, and
reset.
• Display: Program display format, language, warnings, and contrast.
Press MENU to display the main menu screen. Press MENU followed by EXIT
to display the main display.
Pressing the DIAG key displays active faults and warnings and provides
detailed instrument information and sensor diagnostics, including faults,
warnings, sensor 1, 2, and 3 information, current outputs live values, model
configuration string, e.g., 1057PPC03AN, instrument software version, and
AC frequency. Pressing ENTER on Sensor 1 or Sensor 2 provides useful
diagnostics and information (as applicable): Measurement, Sensor type, Raw
signal value, Cell constant, Zero offset, Temperature, Temperature offset,
Selected measurement range, Cable resistance, Temperatue sensor
resistance, and Signal board software version.
Press ENTER to store numbers and settings and move the display to the next
screen.
Press EXIT to return to the previous screen without storing changes.
Selection keys
Surrounding the ENTER key, four selection keys - Up, Down, Right, and Left -
move the cursor to all areas of the screen while using the menus.
Selection keys are used to:
1. Select items on the menu screens.
2. Scroll up and down the menu lists.
3. Enter or edit numeric values.
4. Move the cursor to the right or left.
5. Select measurement units during operation.
Quick Start Guide
Quick Start Guide
15