HIKVISION DS-7208HTI-K2 User Manual page 39

DS-720xHTI-Kx DVR User Manual
If you set the video output resolution as 1024*768 in Menu > Configuration > General, when you set
more than 16 windows, the following message box will pop up as below. If you set the video output
resolution as 1280*720 or 1280*1024 in Menu > Configuration > General, if you set more than 25
windows, the following message box will pop up as below.
If you set the video output resolution larger than 1280*1024, and then switch to low resolution, the
former live view mode will not be changed.
Dwell Time: The time in seconds to
auto-switch in Live View.
Enable Audio Output: Enables/disables audio output for the selected camera in the live view mode.
Volume: Adjusts the volume of the audio output.
Event Output: Designates the output to show event video. If available, you can select a different
video output interface from the Video Output Interface when an event occurs.
Full Screen Monitoring Dwell Time: Sets the time in seconds to show alarm event screen.
2. Set the camera order.
1) Click the View tab and select Video Output Interface from the drop-down list.
2) Select a window, and then double-click a camera name in the camera list you would like to display.
Setting an 'X' means the window will not display any camera.
UM DS-720xHTI-Kx 012918NA
Figure 3-10 Note for Live View Mode
dwell
between switching of channels when enabling
Figure 3-11 Live View-Camera Order
38