HIKVISION DS-7208HTI-K2 User Manual page 135

DS-720xHTI-Kx DVR User Manual
1) Create the verification code, and enter the code in the Verification Code text field.
2) Check the The Hik-Connect service will require internet access. Please read Service Terms and
Privacy Statement before enabling the service. checkbox.
3) Scan the QR code on the interface to read the Service Terms and the Privacy Statement.
4) Click OK to save the settings and return to the Hik-Connect interface.
Hik-Connect is disabled by default.
The verification code is empty when the device leaves the factory.
The verification code must contain 6 to 12 letters or numbers and is case sensitive.
Every time you enable Hik-Connect, the Service Terms interface pops up and you must check the
checkbox before enabling it.
3. (Optional) Check the Custom checkbox and input the Server Address.
4. (Optional) Check the Enable Stream Encryption checkbox.
After this feature is enabled, the verification code is required for remote access and live view.
Use your phone's scanning tool to scan the QR code below to get the device code.
UM DS-720xHTI-Kx 012918NA
Figure 11-3 Service Terms
134