HIKVISION DS-7208HTI-K2 User Manual page 164

DS-720xHTI-Kx DVR User Manual
2. Select the Camera from the drop-down list.
3. Configure the parameters.
Switch the 4 MP or 5 MP signal with the Signal Switch drop-down list. 4 MP 25/30 fps and 5 MP 20
fps are selectable. The 4 MP 25 fps and 4 MP 30 fps signals are self-adaptive for the camera.
Check Enable Defog to enable the selected camera's defog function. Set Defog Level from 1 to 4.
Adjust the parameters including Day to Night Sensitivity, Night to Day Sensitivity, and IR Light
Brightness for the analog cameras.
Select the Day/Night Mode of the camera from the drop-down list.
Check the WDR Switch checkbox to enable the function.
4. (Optional) Click Default to set the parameters to the default settings.
5. (Optional) Click Copy to copy the parameters of the current camera to other analog cameras.
6. Click Apply to save the settings.
The camera parameters settings is applicable only for analog cameras.
The 4 MP/5 MP Signal Switch, Defog, Day to Night Sensitivity, Night to Day Sensitivity, IR Light
Brightness, Day/Night Mode, and WDR Switch functions must be supported by the connected analog
camera. You cannot set the parameters if the connected analog camera does not support them or
there is no video signal.
The parameters are saved to the connected analog camera and are not saved to the DVR.
The default value of Day to Night Sensitivity, Night to Day Sensitivity, and IR Light Brightness is 5. The
effective value ranges from 1 to 9.
If you exit from the interface and enter it again, the parameters displayed are the last ones set.
The DVR connects to the analog camera via Hikvision-C protocol and there is no response mechanism.
Even if the protocol is abnormal, the parameters are still displayed as successfully set.
Figure 13-5 Camera Parameters Settings
163