HIKVISION DS-7208HTI-K2 User Manual page 175

DS-720xHTI-Kx DVR User Manual
3. Enter the information for new user, including User Name, Password, Confirm, Level, User's IP Address,
and User's MAC Address.
Password: Set the password for the user account.
STRONG PASSWORD RECOMMENDED – We highly recommend you create a strong password of your
own choosing (using a minimum of eight characters, including at least three of the following
categories: upper case letters, lower case letters, numbers, and special characters). in order to
increase the security of your product. We also recommend that you reset your password regularly.
Especially in high security systems, resetting the password monthly or weekly can better protect
your product.
Level: Set the user level to Operator or Guest. Different user levels have different operating
permissions.
Operator: The
all operating permissions in Camera Configuration by default.
Guest: The
only the local/remote playback in the Camera Configuration by default.
User's IP Address: Enter the IP address of the user's computer on the network.
User's MAC Address: The MAC address of the remote PC that logs onto the DVR. If it is configured
and enabled, it allows only the remote user with this MAC address to access the DVR.
4. Click OK to save the settings and go back to the User Management interface. The added new user will
be displayed on the list, as shown below.
Figure 15-5 Add User Menu
Operator
user level has permission of Two-way Audio in Remote Configuration and
Guest
user has no permission of Two-way Audio in Remote Configuration and has
174