HIKVISION DS-7208HTI-K2 User Manual page 151

DS-720xHTI-Kx DVR User Manual
2. Click Add NetHDD to enter the Add NetHDD interface.
3. Add the allocated NetHDD.
4. Set the type to NAS or IP SAN.
5. Configure the NAS or IP SAN settings.
Add a NAS Disk
1) Enter the NetHDD IP address in the text field.
2) Click Search to search for available NAS disks.
3) Select the NAS disk from the list shown below, or manually enter the directory in the NetHDD
Directory text field.
4) Click OK to add the configured NAS disk.
Up to eight NAS disks can be added.
Add an IP SAN
1) Enter the NetHDD IP address in the text field.
2) Click Search to search for available IP SAN disks.
3) Select the IP SAN disk from the list shown below.
4) Click OK to add the selected IP SAN disk.
Up to eight IP SAN disks can be added.
5) After successfully adding the NAS or IP SAN disk, return to the HDD Information menu. The added
NetHDD will be displayed in the list.
If the added NetHDD is uninitialized, select it and click the Init button for initialization.
Figure 12-6 Add NetHDD
150