Table of Contents
Advertisement
(I)GW11XX Modbus User Manual
9. Run the "mbpoll.exe" software, click "Setup> Read / Write Definition".
10. Enter "4" in the "Slave ID" text box.
11. Other parameters remain the default, click "OK".
12. Click " Connection > Connection Setup ".
13. Click the "Connection" drop-down list box and select "Modbus TCP / IP".
14. In the "Remote Server" check box, configure the Modbus gateway IP address, port
number, and connection timeout.
15. Other parameters remain the default, click "OK".
Step 6
Check the normal communication between the TCP master and the ASCII slave.
3onedata proprietary and confidential
51
Copyright © Shenzhen 3onedata Technology Co., Ltd.
Advertisement
Table of Contents
