3onedata GW11 Series User Manual page 17

Interface Description
Elements
IP address Configure the IP address manually in the "IP Address" text box.
Subnet mask Configure the subnet mask manually in the "Subnet mask" text
box.
Gateway Configure the gateway address manually in the "Gateway
Address" text box.
The way to get

the DNS server

address
Lan2 Network port 2 network configuration column.
Note：


IP Report IP Report configuration column.
Note：
When the Modbus gateway adopts the "automatic IP address", it
reports the IP address of the user by intermittently, so that the user
knows the new IP address of the Modbus gateway in time.
Sever Address The server that receives the IP address report.
Sever Port The port that sends the IP address report.
Repeat Time The sending frequency of IP report.
When the DHCP server assigns a new IP address to the Modbus gateway, the host
needs to detect the new IP address of the Modbus gateway when the Modbus
gateway is in a network environment that dynamically assigns an IP address. When
the dynamic IP address changes, the Modbus gateway reports its own IP address
to the user by intermittently, so that the user knows the new IP address of the
Modbus gateway in time.
3onedata proprietary and confidential
Copyright © Shenzhen 3onedata Technology Co., Ltd.
Use the following DNS server address: Manually configure
the DNS server address information.
Automatically obtain DNS server address: Automatically
obtain DNS server address information.
The default IP for Lan1 is 192.168.8.254.
Refer to the corresponding section of Lan1 in this table for the
description of interface elements.
(I)GW11XX Modbus User Manual
9