Table of Contents
Advertisement
(I)GW11XX Modbus User Manual
2. In the "Channel NO." is 1, click the "channel Type" drop-down list box and select
"RTU Master".
3. Click "Add" and enter "192.168.1.80" in the "Remote IP Address" text box.
4. Enter "501" in the "TCP port" text box.
5. Enter "1" in the "Slave ID Start" and "Slave ID End" text boxes.
6. Enter "0" in the "Slave ID Offset" text box.
7. Click "OK".
8. Save the configuration, click "Submit".
Step 5
Run "mbpoll" and "mbslave" software to simulate master and slave configuration.
1. Run the "mbslave.exe" software, click "Setup> Slave Definition".
2. Enter "1" in the "Slave ID" text box.
3. Other parameters remain the default, click "OK".
3onedata proprietary and confidential
32
Copyright © Shenzhen 3onedata Technology Co., Ltd.
Advertisement
Table of Contents
