Page 1
Model II GW1102-2D(RS-485) (2 RS-485/422 serial ports + Model I 1 100M copper port) GW1102 Series 【Panel Design】 Modbus Gateway Quick Installation Top view Guide Model I Model II Rear view 3onedata Co., Ltd. Address: 3/B, Zone 1, Baiwangxin High Technology...
Page 2
Lugs Definition Operation Restore factory Set the DIP switch to ON, 【Mounting Dimension】 defaults power on again, restore Unit: mm factory defaults and set it back Reserved Reserved 【Serial Port Connection】 RS-232 serial port The interface type of this series Model l is 【Disassembling the Device】...
Page 3
table below: Power supply Status Description 9~48VDC Input power supply The power connection is operating 2-pin 5.08mm terminal Access terminal normally. Consumption The power is not connected or is Model I No-load: 0.79W@9VDC not working properly. Full-load: 0.86W@9VDC The copper port has established Model II No-load: 0.90W@9VDC an active network connection.