3onedata GW11 Series User Manual page 39

1. Log in to the Web configuration interface and select "Network Setting".
2. In the "Use the following IP address" option box, enter the "IP address", "Subnet
Mask" and "Gateway address" corresponding to the Modbus gateway.
3. Other parameters remain the default, click "submit".
Step 3 Configure the serial port parameter information.
1. Log in to the Web configuration interface and select "Serial Settings> COM
Settings".
2. Select "COM1" in the "Port" drop-down list.
3. Set the "BaudRate", "DataBits", "StopBits" and "ParityBits" in the "Settings" option
box.
4. Other parameters remain the default, click "Submit".
Step 4 Configure the working mode of the Modbus gateway.
1. Log in to the Web configuration interface and select " Main Menu > Modbus
Settings > SlaveID ".
Copyright © Shenzhen 3onedata Technology Co., Ltd.
3onedata proprietary and confidential
(I)GW11XX Modbus User Manual
31