Com Information - 3onedata GW11 Series User Manual

Interface Elements
Flow Control
Work mode
RTSCtrl
DTRCtrl
Apply to all Port

4.2 COM Information

Function Description
On the "COM Information" page, you can view parameter information such as serial
number, alias, baud rate, data bit, stop bit, parity bit and flow control.
Operation Path
Open "Main Menu > Serial Settings> COM Information" in sequence
Description
Flow control is used in two data transmission speed of
different devices in the control of data flow technology to
ensure that two devices communicate with each other to
avoid data loss. Click the "flow control" drop-down list box,
select the flow control parameters, the options are:
No

RTS/CTS

XON/XOFF

DTR/DSR

By hardware and software jointly decided, there are three
modes:
RS-232

RS-485

RS-422

Note:
Different types of products support different types of serial ports.
RTS pin can be controlled, the options are:
AUTO

Force ON

Force OFF

DTR pin can be controlled, the options are:
AUTO

Force ON

Force OFF

Check the "Apply to all port" check box to apply the current
settings to all serial ports.
3onedata proprietary and confidential
Copyright © Shenzhen 3onedata Technology Co., Ltd.
(I)GW11XX Modbus User Manual
12