3onedata GW11 Series User Manual page 52

(I)GW11XX Modbus User Manual
Step 5 Run "mbpoll" and "mbslave" software to simulate master and slave configuration.
1. Run the "mbslave.exe" software, click "Setup> Slave Definition".
2. Enter "3" in the "Slave ID" text box.
3. Other parameters remain the default, click "OK".
4. Click " Connection > Connection Setup ".
5. Click the "Connection" drop-down list box and select "Modbus TCP / IP".
6. Enter the TCP slave IP address "192.168.1.80" in the "IP Address" text box of the
"TCP / IP Server" area.
3onedata proprietary and confidential 44
Copyright © Shenzhen 3onedata Technology Co., Ltd.