About This Chapter
Content
This chapter
4.1 COM Settings
Function Description
On the "COM settings" page, you can configure basic parameters such as baud rate,
data bit, stop bit and parity bit corresponding to the serial port number. You can also
configure whether the corresponding serial number is enabled for FIFO function, RTS
control, DTR control and Packing length and other advanced parameter information.
Operation Path
Open "Main Menu > Serial Settings > COM Settings" in sequence
Interface Description
COM settings interface screenshot
Hyperlink
4.1 COM Settings
4.2 COM Information
3onedata proprietary and confidential
Copyright © Shenzhen 3onedata Technology Co., Ltd.
(I)GW11XX Modbus User Manual
4
Serial Settings
10